Page 10 - Shimadzu Nexera X2

True High-Throughput Analysis

Nexera MP System — Ideal as an LC/MS Front-End LC

The Nexera MP system, equipped with the SIL-30ACMP autosampler, serves as a
high-performance front-end LC to maximize the performance of LC/MS systems.
In the standard configuration, six microplates (96/384-well MTPs or DWPs) or 1.5
mL vial racks can be used. This provides an open access system that allows you
to use different plates for each rack and place samples at any time, even during
sample injection, except on the rack being used for injection. Just as with the
SIL-30AC, thorough measures have been taken to minimize carryover, which
makes it an ideal system for use as a front-end LC for LC/MS systems.

Nexera MP System Sample Processing Capacity
Plate Type Number of Samples Processed
1.5 mL vial plates 324
96-well plates 576
384-well plates 2304
Note: In addition to the above, ten 1.5 mL vials can be used.
The Nexera MP system is able to access samples via the quickest path
by moving the needle in both X and Y directions simultaneously.
This achieves higher injection speeds than ever before, with shortest
injection time being about 7 seconds.

Improved Overall Analysis Throughput

Even on current models, use of the SIL-30ACMP speeds up analysis. The following example shows that the analysis time can be shortened by at
least 2 hours when an injection is performed 1000 times using the SIL-30ACMP.

Approx. 1.6 times faster SIL-30ACMP

0 6 18 30 42 54 sec
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 min
4 injections are completed within 1 minute.

Current
model

0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 min
Comparison When Up to 30 Injections Are Performed

10