Page 17 - Shimadzu AA-7800 Series

Optional Accessories Installation Conditions

For more details, refer to the Pre-Installation Requirements.

ASC-7800 Autosampler Choose from 100, 120, 220, or 230 VAC, Example of recommended piping for the atomic absorption system
(P/N 208-00400-XX) Power Main unit 230 VA, 50/60 Hz
Power requirements: 100 to 240 VAC, 50 VA, 50/60 Hz requirements 200, 220, 230, or 240 VAC ±5%, Stainless steel piping
(inner diameter greater than 7 mm)
Compact-size autosampler for flame and furnace units can install 60 samples and GFA-7800 7400 VA, 50/60 Hz
8 reagents. Setting pressure
ASC stand kit (208-00490-41) is required to mount with dedicated flame Operating Temperature range 10 to 35 °C Stop cock Stop cock 0.11 MPa
measurement system, and ASK-7800 extension unit for furnace measurement is environment 20 to 80% (less than 70% when
For furnace measurement
For flame measurement
required to mount with dedicated furnace measurement system or dual system. For flame measurement For furnace measurement Humidity range temperature is higher than 30 °C)
An ASC starter kit for aqueous solutions (206-59765-41) or organic solvents 1500 mm min. (W) × 700 mm min. (D)
(206-59765-42) is required for the flame continuous method or hydride generation Testing bench Pressure regulator
method. Withstand load: 200 kg *1, 2 Pressure range 0.3 MPa Acetylene gas
Material Stainless *3 Setting pressure 0.09 MPa
Gas tube
HVG-100 Hydride Vapor Generator AMF-100 Atomic Absorption Dimensions 7 mm min. I.D. × 80 mm min. (L) Setting pressure
0.4 MPa
(P/N 208-00900-XX) Muffle Furnace (Electronic Cell Heater) Acetylene Cylinder: 0.11 MPa
Power requirements: 120, 230 VAC, 50 VA, (P/N 208-00950-47) Lab: 0.09 MPa
50/60 Hz Power requirements: 200 to 240 VAC, 550 VA, Gas supply Compressor: 0.4 MPa
This is useful for high-sensitivity analysis of 50/60Hz pressure Air Lab: 0.35 MPa Setting pressure
elements such as As, Se, and Sb. This dedicated furnace permits higher sensitivity (set secondary Cylinder: 0.4 MPa Dinitrogen 0.4 MPa
Used with an ASC-7800 autosampler, it permits measurements using the hydride vapor generator pressure) Dinitrogen oxide Lab: 0.35 MPa Pressure range 1 MPa oxide gas
the automated serial analysis of up to 60 samples. than the flame heating method. The temperature This product contains Refractory Setting pressure 0.35 MPa
Nozzle ASSY, HVG (P/N: 206-67563) is required controller provides optimal control of the quartz Ceramic Fiber (RCF) and cannot be Argon Cylinder: 0.4 MPa
for operation in conjunction with the ASC-7800. cell temperature to prevent damages to cells due to sold in some areas. Please inquire Lab: 0.35 MPa
Pressure range 1 MPa
excessive overheating. about the details. Material Stainless Setting pressure 0.35 MPa Argon gas
Mount adopter is required separately.
MVU-100 Mercury Vaporizer For AA-7800F: 206-52135-41 Dimensions For flame: Approx. 500 mm W × 500 mm D Setting pressure
0.4 MPa
(P/N 208-00850-XX) For AA-7800G: 206-83755-91 Exhaust duct For furnace: ø150 mm to ø200 mm Mist separator
Power requirements: 100 to 240 VAC, 50 VA, * The AMF-100 cannot be used with the AA-7800F/AAC. For flame: 600 to 1200 m /hr Pressure range 1 MPa
3
50/60 Hz Intake capacity For furnace: 10 to 180 m 3 /hr Setting pressure 0.35 MPa
This mercury vaporizer is for cold vapor atomic Atom Booster Cooling water circulation unit or tap-water Lab Outdoor
absorption spectroscopy. (P/N 206-50957-91) Cooling water (GFA-7800) equipment *4 Air compressor
It also requires a gas flow cell (201-98687), gas Quartz slotted tube, useful for further increasing 80 m max.
flow cell holder (206-77703-91), and mercury sensitivity of flame analysis with a cell holder. *1 Atomic absorption spectrophotometer stand recommended
hollow cathode lamp (200-38422-28). * Cannot be used with N2O-C2H2 flame. *2 Maintain a free maintenance space of 150 to 200 mm to the sides and rear of
Contact us for information about the types of the instrument.
samples for which this option is available and *3 Do not use pipes containing copper, silver, gold, mercury (or alloys containing
Burner Head with Angle-scale the elements for which this option is useful. these metals) as pipes for acetylene.
Markings *4 If tap-water equipment is used, ensure that it meets the specifications below.
(P/N 206-50370-92) Graphite Furnace Camera GFA-TV Compatible faucet Faucet 13 or 12 to 15 mm O.D. rimmed faucet
Used to specify a constant fixed angle for (P/N 206-52950-41) Water temperature 10 to 30 °C
measuring high concentration elements by Provides viewing inside the graphite tube. Water flow rate 0.6 to 1.5 L/min
changing the burner angle. Including Video View Software (CD-ROM) Supply pressure 0.08 to 0.15 MPa *5
Position of the supply port Within 7 m of the instrument
Micro Sampling Kit
High-temperature Burner Head (P/N 206-77540-91) *5 If the supply pressure exceeds 0.17 MPa, use the optional Regulator ASSY.
(P/N 206-77530-91)
Required to use the flame micro sampling method. ASC-7800 and
Made of pure titanium. Air-cooled. 5 cm slot for ASK-7800 (or ASC stand kit) are also required.
N2O–C2H2 flame
• Extremely corrosion-resistant O-Ring Set
• Can also be used for Air–C2H2 flame.
Required for analyzing organic solvents in flame analysis. Contact us for available
organic solvents. Dimensions
Fluoro Rubber O-Ring Set (P/N 206-77620-92)
Silicon Rubber O-Ring Set (P/N 206-77620-93)
Wall
Compressor and Gas Equipment
Table
Part Name P/N Remarks 150 to 200
Low-noise air compressor 208-91750-36 220/230 VAC, 50/60 Hz, with mist separator
Mist separator kit 206-52458-41 Required if using an air compressor other than above. AA-7800
YR-71 compressed gas regulator 040-72020-01 For acetylene cylinder
702 GFA-7800
NP2-3-10B6-2RFH85-V compressed gas regulator 040-72034-01 For dinitrogen oxide cylinder (freeze-proof model)
ASC-7800
FR-2S-OP compressed gas regulator 208-91763 For argon cylinder 610
Pressure regulator set, Air 208-91756-91 Pressure regulator for use in laboratory (for air) 390
Pressure regulator set, C2H2 208-91756-92 Pressure regulator for use in laboratory (for acetylene) 870
Pressure regulator set, N2O 208-91756-93 Pressure regulator for use in laboratory (for dinitrogen oxide)
Pressure regulator set, AR 208-91756-94 Pressure regulator for use in laboratory (for argon)
340
Hose ASSY 206-50389-41 For air used to promote incineration in GFA
280 940
Cooling Water Equipment Unit: mm
Part Name P/N Remarks
CA-1116A cooling water circulator 044-01813-51 For cooling GFA, 100 VAC, 1100 VA, 50/60 Hz
Cooler attach kit 206-84373-41 For connecting GFA and cooling water circulator
Cooling water tube ASSY 206-51028-91 Connecting tubes when using tap water to cool GFA
Regulator ASSY 206-86147-41 Decompression valve when using tap water to cool GFA
16 17