Page 9 - Shimadzu Xslicer SMX-1010

Diverse Functions Provide 3D Analysis

with a Single Unit

Simple CT Function with High Image Quality (Optionally Available) Panoramic Imaging Function

Simply position the compact CT unit on the fluoroscopic stage and switch the software tab to enable 3D analyses unobservable A wide X-ray fluoroscopic image can be obtained just by specifying the imaging range on the exterior image. An improved
with fluoroscopic functions. There is no need to switch software programs, so CT imaging can start easily. stitching process ensures a panoramic X-ray fluoroscopic image up to 32 megapixels in size can be obtained with no conspicuous
marks where the images are spliced together.

300 mm

Flat Panel Detector Panoramic Image
300 mm No Splicing (region enlarged)

CT Stage
Sample

X-Ray Source
CT Unit Attached

32 Megapixel Panoramic Image Panoramic Image
Automated Calibration (Shorten the time for process before imaging by 80 %) Combined 9 × 10 images by Xslicer SMX-1020 Splicing (region enlarged)

300 x 350 mm
Calibration has been automated, simplifying CT imaging. There is no need for calibration each time a sample is loaded as Imaging Mode Pixels Scanning time for entire range
previously. Imaging is started simply by selecting either [Simple], [Normal], or [Fine].
Simple Equivalent to 2K (full HD) in size Approx. 2 million pixels SMX-1010 : 115 sec / SMX-1020 : 100 sec

Normal Equivalent to 4K in size Approx. 8 million pixels SMX-1010 : 135 sec* / SMX-1020 : 120 sec
Sample Attached
Fine Equivalent to 8K in size Approx. 32 million pixels SMX-1010 : 590 sec / SMX-1020 : 495 sec

*The SMX-1000 Plus takes 395 seconds at the fastest.
Image Capture Positioning
Image Adjustment Functions
(Auto Window Function and Area of Interest Function)

Setting the Imaging The contrast can be automatically optimized to make the area of interest easy to see.
Conditions
Software Window
AW ON Area of Interest

CT Imaging + Automatic
Reference Calibration
The optimal window When selecting an
level and window area of interest, the
width are configured AW OFF window level and
in real time even if the window width are
Imaging Reconstruction conditions change. optimized for the
specified range.
Imaging Process Cross-Sectional Image 3D Image

Xslicer SMX-1010/1020
8 Microfocus X-Ray Inspection System 9