Page 12 - Shimadzu PDA-7000

Options

Extensive options are available to handle a variety of analyses.

Electrode-cleaning Unit Factory Calibration (FC)

To enhance long-term stability, the optional electrode-cleaning unit keeps the counter electrode
clean by brushing away adhering sample deposits. The attached sample retainer mechanism Internal calibration curves (Note 1)
allows anyone to set samples under identical conditions. sample retainer Type Steel : 10 types FC Low-alloy steel 211-53955-01
FC
Austenitic stainless steels
211-53955-02
mechanism
FC Ferrite stainless steels 211-53955-03
FC Low-alloy cast iron 211-53955-04
FC Free-cutting steels 211-53955-05
FC High-manganese steels 211-53955-06
FC High-speed tool steels 211-53955-07
FC High-alloy cast iron 211-53955-08
FC Ni-resist cast iron 211-53955-09
GC Steel (Note 2)
Note 1: Must be ordered with the instrument. Note 2: The following two items are required for GC steel:
1. Global Calibration (GC), steel (P/N: 211-53953)
2. 31 for global standardization (P/N: 210-00004-31)
Type Aluminum alloy : 6 types Low-alloy Al Al – Cu
Electrode Brush Al – Si Al – Zn
Brush
Al – Si – Cu Al – Mg
Sample cleaning unit Type Copper alloy : 8 types FC Bronze 211-53956-01
FC Gun Metal 211-53956-02
Stand Water-cooling Kit (P/N: 211-74666-92) FC Aluminum Bronze 211-53956-03
FC Brass 211-53956-04
Enhances the stability of the measured values by restricting the spark stand temperature rise due to electrical discharge during
FC Silicon Brass 211-53956-05
continuous analysis. FC Pure Copper 211-53956-06
FC Nickel Silver 211-53956-07
FC Capro Nickel 211-53956-08
Small-sample Analysis Kit (P/N: 211-74665-**) Consult your Shimadzu representative about other metals.
Handles samples between 3 mm and 12 mm in diameter.

Sample diameter 3mmø,or more P/N S211-74665-93
4mmø,or more P/N S211-74665-96
5mmø,or more P/N S211-74665-94
6mmø,or more P/N S211-74665-95
7mmø,or more P/N S211-74665-91
8mmø,or more P/N S211-74665-97
9mmø,or more P/N S211-74665-92

Pin sample
Pin Sample Holder (P/N: 211-74594)
Handles wire and bolt samples
between 0.6 mm and 12 mm in diameter.
Pin sample holder

PDA-7000 Series
12 Optical Emission Spectrometer 13