Page 8 - Shimadzu GC-2014

Flexibility
Expandability to Support all Types of Analysis

For varied and complicated analyses, an array of units and detectors provide quick, easy solutions

A Full Line of Injection Units Compact, High-Sensitivity Detectors

Obtaining better data requires that the appropriate analyzed. With the GC-2014, the optimum injection The TCD employs the highly regarded semi-diffusion TCD cell of the GC-14 Series.
column and sample introduction method be selected mode can be selected from four types of injection units. High-selectivity detectors offer superb sensitivity realized by further improving the technology used in the GC-2010 detectors.
according to analytical objectives and samples to be
Flame Ionization Detector Flame Thermionic Detector
Dual Packed Split/Splitless FID-2014 FTD-2014C
Injection Unit Injection Unit
DINJ-2014 SPL-2014 Automatic ignition and re-ignition functions are standard. By mounting an APC This specialized capillary-type detector employs the FTD-2010
or solenoid valve unit, a feedback function cuts off gas supply when the mechanism. Used for analysis of organic nitrogen compounds and
hydrogen ame is extinguished. Generally used for detection of organic organic phosphorus compounds such as residual pesticides.
Designed for Dual FID and TCD Standard unit for high-speed
analyses. analysis with a narrow bore compounds with a hydrogen carbon bond. The new collector construction allows replacement without tools.
Because two ow paths are column. An optional ame monitor is available. An optional alkali source regeneration kit recoats the bead
handled using one The gas saver function restricts Single and dual FID’s are available. reducing running costs.
temperature control port, the total gas used.
these count as one heated High-pressure injection
zone. standard Thermal Conductivity Detector
*Collector replacement
TCD-2014 requires no tools.
Single Packed Direct Injection
Injection Unit Unit The TCD-2014 is a semi-diffusion type cell reducing contamination and increasing
cell lifetimes. Incorporates an automatic lament protection circuit. The TCD-2014 Flame Thermionic Detector
SINJ-2014 WBI-2014 is used for analysis of inorganic gases and concentrated organic compounds.
FTD-2014
This is a specialized sample Incorporates a septum purge
injection unit for use with ECD ow path to restrict solvent Electron Capture Detector Packed column analysis is supported by the FTD- 2014 using the
or other high sensitivity tailing. FTD-14 mechanism and collectors from both the FTD-14 and -17.
detectors. Sharing glass inserts with ECD-2014
splitless analysis simpli es
parts requirements (patented). This cell is very similar to the ECD-14; so spare radiation sources can be shared.
This detector is used for analysis of electrophillic compounds. Improved cell
insulation and reduces contamination achieving higher sensitivity.
Optional Units
Simultaneously Mount up to CAUTION
Three Injection Units and Four Detectors Top of GC-2014 The ECD uses a radioactive Ni63 source. Special governmental registration is required to A variety of options support various types of analyses
use or purchase it. Please check with your local Shimadzu representative for relevant
regulations in your area.
Select from four types of injection units and ve types of detectors according
AOC-20 Series SystemGC
to the target compounds and analysis objective. Modular injection units,
detectors and auto-injectors can be easily added after installing the unit in Detector mounting site The AOC-20i auto injector A sub-door is included for
Flame Photometric Detector
your lab. and AOC-20s auto sampler SystemGC products. The column
FPD-2014 is used with the GC-2014. oven door is separated into the
Flexibility 7 8 9 The FPD-2010, the nozzle system was updated to provide support for packed Varying the parameters of column and sub door. The sub-door
can accommodate three
sample injection sets the
Unit Addition 1 5 2 6 3 4 column analysis while maintaining its high sensitivity. The ability to exchange optimal injection mode. temperature-controlled valves, and
Options after Installation OPTION 1 2 3 4 nozzles optimizes both packed column and capillary column analyses. This high level of precision the left-side panel three valves that
4 types of injection units The FPD-2014 is compact with a high maximum temperature (350°C). This and repeatability is not are not temperature-controlled.
Injection units / Detectors possible with manual The PRG-2010 is used to control
Auto-injectors Injector mounting site detector is used for analysis of organic sulphur compounds and organic
5 types of detectors Various options can be added phosphorus compounds such as residual pesticides and malodorous components. injection. these valves.
SystemGC’s are custom order
*Filter replacement requires products. For details, contact your
no tools.
Shimadzu representative.

GC-2014
8 9 Capillary and Packed Gas Chromatograph 10