Page 1 - Shimadzu DUH-211/

C227-E024C

Example of Dynamic Ultra Micro Handness Tester DUH-211/211S Systems DUH-211/211S

Dynamic Ultra Micro Hardness Testers
DUH-211/211S

Electric X–Y High-Temperature P/N 347-24700-41 (50 Hz)
Stage System P/N 347-24625-41 Unit System 347-24700-42 (60 Hz)

• Stroke X-axis, Y-axis ±25 mm • Temperature From 30°C above room temperature to 250°C
(There is the function that the slides 50 mm toward the X-axis. Setting Range (temperature control is possible at 50°C or higher)
All stroke of X-axis are 100 mm) • Accuracy Within ±2°C of set temperature
• Resolution 0.001 mm • Total Magnification ×400 (objective lens: ×40; eyepiece: ×10)
• Drive method Ball screw actuated by stepping motor of Microscope
• Utilities 100V 50/60 Hz
* Compatible to electric Z system.
* High-temperature systems are only available when ordering the main unit.

Related Products

Micro Compression Testing Machine Micro Hardness Tester Fully Automatic Micro Hardness Tester
MCT Series HMV-G21 HMV-G-FA
This machine is used to measure the compressive This type of hardness tester automatically By including an automatic measurement function,
strength of single particles (of diameter 1 µm or measures length using a built-in CCD camera. The an electric XYZ stage function, and an auto-focus
greater). The compressive strength of ceramics, automatic measurement function provides easy function to a micro Vickers hardness tester used
plastics, pigments, food products, and and worry-free measurements without human for evaluating the hardness of paint or plating
pharmaceuticals can be measured at a particulate error. The innovative G-frame provides a broad coatings or surface-hardened layers, this automatic
matter stage, providing data that is closely related work area, dramatically improves operability, and hardness tester is able to perform a continuous
to the final application of these substances. easily accommodates long samples or other series of highly precise measurements
samples with a large area. automatically.
• Loading Electromagnetic force The automatic lens switching function
Method 9.807 mN to 1.961 N or automatically switches to the magnification • Test Force Range 98.07 mN to 19.61 N
9.807 mN to 4.903 N appropriate for the given indentation size, which (Optionally from 9.807 mN)
• Indenter Diamond, cone-shaped, means anyone can operate the system accurately. • Electric XY Stage Stroke: ±25 mm
50-µmø diameter Resolution: 0.001 mm
• Displacement Differential transformer • Test Force Range 98.07 mN to 19.61 N • Electric Z Stage Stroke: 40 mm
Measurement 0 µm to 10 µm or 0 µm to 100 µm (Optionally from 9.807 mN) Resolution: 0.001 mm
• Optical Monitor Equipped with ×500 microscope • Indentation Approx. 0.3 sec.
Measurement Time
• Equipped with revolving electric turret (HMV-G21T)

Windows is a registered trademark of Microsoft Corporation in the US and other countries.

For Research Use Only. Not for use in diagnostic procedures.
This publication may contain references to products that are not available in your country. Please contact us to check the availability of these
products in your country.
Company names, products/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation, its
subsidiaries or its affiliates, whether or not they are used with trademark symbol “TM” or “®”.
Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services, whether or not
they are used with trademark symbol “TM” or “®”.
Shimadzu disclaims any proprietary interest in trademarks and trade names other than its own.
www.shimadzu.com/an/ The contents of this publication are provided to you “as is” without warranty of any kind, and are subject to change without notice. Shimadzu
does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.
© Shimadzu Corporation, 2018
First Edition: June 2006, Printed in Japan 3655-11801-10ANS