Page 15 - Automobile Evaluation Instruments

内圧疲労試験機
タイヤ圧縮試験機
振動試験機
ルーフボデ ィ圧縮試験機
ショックアブソーバ試験装置
ねじり疲労試験機
サーボパルサ U 型フレーム
����
インテリア衝撃試験機
シートベルトアンカレッジ試験機
Hydraulic Universal
Testing Machines
����
Automobile Testing Laboratory
小野式回転曲げ疲労試験機
Servopulser Servo Dynamic Systems
Distortion Measurement in High-Speed Tensile Testing of Resin, Composite Materials, and Metals
Torsional Fatigue
Testing Machines
Compact Hydraulic Actuator
HyperVision HPV-X2 High-Speed Video Camera
A combination of the HITS hydroshot high-speed tensile testing machine
and HPV high-speed video camera enables the measurement of distortion
Ultrasonic Fatigue Testing System
Micro Compression Tester
and test force under high-speed loads. The analytical data obtained can be
used for simulation development in CAE analysis, for example, and is useful
for shortening the development cycle of members and parts using the
target material and for reducing development costs.
The HPV can record the breaking of specimens at a high image capture
Microfocus X-Ray CT System Research and Development X-ray Diffractometer Research speed of 1 million frames per second (fps), and the breaking of specimens HyperVision HPV-X2 High-Speed Tensile Testing of ABS Resin
Ultra High Performance Liquid Chromatograph
Electromagnetic Force Fatigue/Endurance Testing System
High-Speed Video Camera
(Synchronous Image Capture by High-Speed
can be expressed in sync with S-S curves by performing image analysis.
高速度ビデオカメラ
Video Camera)
and
Testing of Steel Plating for Bodies
Micro Compression Tester Differential Scanning Calorimeter Development Packed Gas Chromatograph Steel plating for bodies is required to have
Standard Capillary and
increasingly higher tensile strength so that
Scanning Probe Microscope
automobile frames can be made lighter. This
system for tensile testing of high tensile strength
steel plates lightens the load placed on
measuring personnel since the specimen and
extensometer can be set up by operating Yield point
buttons. n value, r value
It also allows almost all of the material
Research and Development characteristics required to be measured in tensile Semi-Automatic System
Fracture elongation
testing - modulus of elasticity, tensile strength, n
and r values, etc. - to be measured extensometer
Hydraulic grips
simultaneously. Tensile testing of aluminum Test force momentarily Pinch prevention
rises when weld peels off.
In the product research and development department, assurance department. Furthermore, in the R&D members for engines and peel testing of spot Dedicated software
Transfer to host
welding and parts for securing air bags can also
tests and analyses are performed on newly adopted department, special cutting-edge tests and analyses are
be performed.
candidate materials for the purpose of product required in addition to proprietary evaluations capable
development. To resolve problems occurring at the of confirming the performance to be evaluated in
prototype stage, trial products are also subjected to developed products. Evaluation of Thin Plate Formability (Draw Bead Testing)
defect analyses, in the same way as in the quality
Automobile bodies are formed by press working. The press conditions are Withdrawal
determined according to various conditions, including the iron plate Bead holder Specimen
thickness, formed shape, and strength. This testing unit is mounted on the
Shimadzu Autograph to perform draw bead testing of steel plate
High-Speed Tensile/Puncture Testing of Members and Various Materials for Bodies specimens. Press formability is evaluated and tested by hydraulically Compressive
pressing against the steel plate specimen and chucking one end of the force
(20 kN max.)
HITS-T10 Hydroshot High-Speed Tensile Testing Machine / specimen with a grip to pull it up.
HITS-P10 Hydroshot High-Speed Puncture Impact Testing Machine
Push bead
Presser bead -0.3 to 9.7 mm (tip radius R 0.5, 60°)
Along with a higher demand for improved safety and reliability, (Adjustable in 10 steps
the evaluation of the dynamic strength (impact resistance) of using ten 1 mm thick spacers.)
materials and parts is becoming more and more important.
This system can reliably measure various physical property Friction Force Measurement of Power Windows Operation Force Evaluation of Turning
values of aluminum and compound materials for bodies, values
that are required for energy absorption efficiency at impact and and Operation Force Evaluation of Indicator and Wiper Levers
CAE analysis at high-speed deformation. Operation Switches This system evaluates the operation force and strength of turning indicator
High-speed tensile testing and puncture testing up to a and wiper levers, which are repeatedly operated together with the steering
maximum speed of 72 km/h (20 m/sec) and a maximum test HITS-T10 Hydroshot HITS-P10 Hydroshot Friction forces due to rubber parts are measured wheel during driving. Autograph applies vertical motion and rotary load to
force of 10 kN are possible. High-Speed Tensile Testing Machine High-Speed Puncture Impact Testing Machine when a window moves up or down.
each of the levers, and quantitatively evaluates the force for operating
them.
Tensile testing Rotation
Rotation
Tensile
Tensile
pressure
pressure
Testing system for evaluating the operating Window The operation lever assembly is secured on the bed and the turning indicator lever is moved.
Material: Aluminum, t = 0.75 mm Round rod: 5 mm dia. force and strength of switches used for
Speed: 20 m/s Speed: 5 m/s
(High-speed puncture testing) (High-speed tensile testing) opening and closing power windows.
Rubber
Example of Aluminum Experimental Data
Engines, Motors, and Bodies and Interiors Lithium-Ion Rechargeable
Power Sources Batteries and Fuel Cells
Suspension and Other Power Electronic Instrumentation Environmental This page may contain references to products that are not available in your country. 15
Transmission Systems Components Conservation
Please contact us to check the availability of these products in your country.
島津-自動車関連カタログ 英文.indd 15 16/05/02 13:46