Page 12 - Automobile Evaluation Instruments

小型卓上試験機
エア式疲労・耐久試験システム
精密万能試験機オートグラフ
基板開発部
全自動プラスチック曲げ試験システム
材料技術部 （電機 ・ 電子材料）
Nano Particle Size Analyzer
Quality Assurance 電 磁 力 式 微 小 材 料 試 験 機 Flowtester Capillary Rheometers Thermal Analysis of Rubber, Plastics, and Other Polymer Materials

Simultaneous ICP Atomic Emission Spectrometers
DTG-60/60H TG/DTA Simultaneous Measuring Instrument
The thermal characteristics and heat resistance of materials can be learned by measuring the weight changes and heat
Gas Chromatograph Mass Spectrometer absorbed or generated during heating. This allows the heat resistance of engineering plastic materials and content of
X-ray Diffractometer
reinforcing materials such as carbon black in rubber to be known.
Sequential Type ICP Emission Spectrometer Electron Probe Microanalyzer

High-Precision Composition Analysis of Various Materials
TG/DTA Simultaneous Measuring Instrument LAB CENTER XRF-1800 Sequential X-Ray Fluorescence Spectrometer

This system can qualitatively and quantitatively analyze a wide range of
specimens - solids, powders, liquids, thin films, and other materials. It
incorporates the latest functions, such as higher precision qualitative and
quantitative functions that use higher-order lines and the world’s first
250 µm-compatible mapping, as well as higher operability.

Composition Analysis of Various Materials for Automobiles

ICP Series Plasma Emission Spectrometers
Quality Assurance This series can analyze the composition of all kinds of materials used in
automobiles at high sensitivity and with high precision. The substantial
lineup of models includes a low running cost, high-throughput multitype
model and a high-resolution, high-precision sequential type model.
The product quality assurance department performs a material inspections, fracture surface analyses and other
variety of tests and analyses in order to assure product analyses performed by the quality control department. In ICPE-9800 Multitype ICPS-8100 Twin Sequential Type
performance. As with the quality control department, addition, in analyzing the causes of fractures, strength
confirmations are performed to ensure that raw materials evaluations are performed on materials excised from Quality Control of Raw Qualitative Analysis and Residual
satisfy the standards. Further, to resolve product defects, defective parts in order to investigate causes from multiple Materials, Parts, etc. Stress Measurement of Various Materials
procedures are also performed to specify the causes of such perspectives. Other evaluations/tests include substantiative MXF-2400 Multi-Channel X-Ray Fluorescence Spectrometer XRD-7000S/7000L X-Ray Diffractometer
defects, including what damaged the parts and how evaluations of the processes leading to damage and
Capable of simultaneous analysis of 36 elements, this system quickly and This X-ray diffractometer incorporates a horizontal goniometer that can
malfunctions occurred. In addition, microscopic analyses, problems via endurance evaluations, as well as strength easily performs non-destructive analysis for factory control, research, and accommodate large-size specimens up to 350 mm in diameter. It can be
surface analyses, and morphological observations are evaluations under simulated usage conditions, and failure automated systems with high precision. It can be applied to the control applied to the surface qualitative analysis of automobile mechanical
analysis and research analysis of raw materials, new materials, and elements, quantitation of austenite, and residual stress measurement. It
performed. These are even more detailed than the foreign tests of actual products and parts. products, and can analyze trace amounts to high-content amounts of a can also be used for the qualitative analysis of various catalysts for treating
diverse range of specimens. gas emissions.
VOC Measurement & Odor Analysis Inside Automobiles/Physical Properties
Evaluation and Structural Analysis of Polymer Materials for Interiors

GCMS-QP2020 Gas Chromatograph Mass Spectrometers
●Thermal Desorption Analysis System
This thermal desorption system heats samples in a sample tube and then
focuses the thermally desorbed gases before injection into a GCMS system.
It is used to measure volatile organic compounds (VOCs) within the automobile
cabin or measure trace components released from resin sample pieces Development and Evaluation of All Sorts of Automobile Materials
out of parts and materials.
Development and Evaluation of All Sorts of Automobile Materials
Single shot（TD） EPMA-8050G Electron Probe Microanalyzer
●Thermal Decomposition Analysis System Double shot（PY）-GC/MS
TD： 40～300℃（20 ℃/min）
This system analyzes plastics, rubbers, resins and other PY： 550℃ GC Column This state-of-the-art top-of-the-line electron probe microanalyzer is used to
polymer compounds characteristic of materials used in 30 m、0.25 mm I.D. develop and evaluate all kinds of materials used in automobiles, such as
automotive interiors, batteries, and so on, by decomposing internal combustion engine components, power train components, brakes,
the sample at temperatures above 500 °C and then using GC OVEN： automotive steel panels, films and coatings, wheels, tires, interior parts,
GC-MS to analyze the resulting thermal decomposition MS temperature rising lithium-ion rechargeable batteries, fuel cells, catalysts, electronic
program
products. The system is also suitable for analyzing the instrumentation boards, and automotive glasses. The EPMA-8050G
structure of polymers, because the resulting thermal 1st：TD-GC/MS…additive analysis features a field emitter (FE) that provides an unprecedentedly large electron
decomposition products reflect the original structure of the beam current, which achieves among the highest resolution and highest
polymer compound. It is also used to measure plasticizers 2nd：Py-GC/MS…resin analysis sensitivity levels in the world. EPMA-1720/1720H EPMA-8050G
and other additives.
Engines, Motors, and Bodies and Interiors Lithium-Ion Rechargeable
Power Sources Batteries and Fuel Cells
Suspension and Other Power Electronic Instrumentation Environmental This page may contain references to products that are not available in your country. 13
Transmission Systems Components Conservation
Please contact us to check the availability of these products in your country.

島津-自動車関連カタログ 英文.indd 12 16/05/02 13:46