Page 11 - Shimadzu Nexera UC - Nexera UC Prep
P. 11

Purification





 High recovery rate of preparative purification with excellent operability




 In purification using SFC, the target compounds are recovered in high concentrations in an organic solvent, which saves time
 not only during analysis, but also during post-run processing after preparative tasks are complete. The Nexera UC Prep
 maximizes fractionation output with its high recovery rates and ability to carry out continuous preparative work that further
 shortens the user’s waiting time.

                  Stacked injection function eliminates waiting time
               Normal injection wastes time between peak elutions. Using the Nexera UC Prep’s stacked injection function, samples
               can be injected continuously without any waiting time, enabling more samples to be processed. Settings for this
 SFC shortens analysis times  function can be specified easily in the dedicated software Prep Solution.
 Due to the low viscosity and high diffusivity of supercritical CO2, column backpressure for SFC is low even at high flow rates
 which enables faster analysis without sacrificing column efficiency. This allows significantly shorter analysis times than HPLC.  Normal injection
                                       Fractionation
                           Waiting time

 HPLC
                                                                         3 injections



 SFC                   Injection                           10.5 min
                                                                                3× more injections
 1/4 of the analysis time  Stacked injection (9 consecutive injections)

                           Waiting time  Fractionation

 0  6  15  24  min                                                       9 injections
 Comparison of HPLC and SFC (Chiral separation of Omeprazole)

                                                           10.5 min

 High recovery rates   Injection   Chiral separation of warfarin
 In preparative SFC, one factor that results in lower recovery rates is increased scattering of the eluent when the CO2 returns
 from a supercritical to a gaseous state. The Nexera UC Prep’s patented gas–liquid separator, the LotusStream separator,   Simple post-run processing
 successfully reduces sample dispersion and carryover, while also achieving high recovery rates. These high recovery rates can
               Because most of the mobile phase is vaporized supercritical CO2, only the organic solvent (modifier) added to
 be obtained regardless of flow rate or modifier concentration, even for volatile compounds such as the fragrance linalool.
               change the polarity of the mobile phase remains after preparative work. Since there is no water content in the
 Comparison for 1% linalool  recovery fraction, the concentration time is significantly shorter.
 LotusStream separator (patented technology)
 Equipment  Recovery rate
 Decreases flow rate without increasing the pipe   Eluent
 Conventional separator  78.0%                             Long concentration time
 diameter by splitting flow through multiple
 LotusStream Separator  96.7%  channels. The CO 2  is discharged externally while   Preparative HPLC
 the liquid travels along the column and drips
 directly into the collection vessel without
 dispersing or scattering the eluate.        Water/MeOH
 CO 2
                                                       Short
                                                    concentration
                                                       time
                           Preparative SFC
 Watch videos  Liquid

                                               MeOH



 10                                                                                                               11
   6   7   8   9   10   11   12   13   14   15   16