Page 5 - Shimadzu MST-I

Optional Accessories

For Tensile Testing Jigs Common to Tensile, Compression and Shear Testing
Grips Fixing jig – for fixing the bottom end of the specimen
P/N Product name Specification Comments P/N Product name Specification Comments
Max. test force: 500 N Specimen fixing vise Can be directly
500 N small flat grips Clearance: 0 to 5 mm 341-64251 mounted on the XY
346-51690-03 (Upper and lower grips: 1 set) Face width: 25 mm Film, plastic, etc. stage
Face length: 20 mm Mount on top of a
Fixes approx. 10 x 10 mm
Max. test force: 10 N Bonding wire, 346-53301 5 N specimen fixing jig specimens bottom-mounted 0.5 N
10 N micro-chuck Clearance: 0 to 0.3 mm monofilaments, cell
346-53492 (used in test examples) Face width: 1.5 mm biospecimens (20 to 200 mm
Face length: 1.5 mm dia.; grip length 0.5 mm min.) Heating plate – for heating test specimens
10 N micro-chuck Max. test force: 10 N For solder ball tensile
346-53492-01 P/N Product name Specification Comments
(with tweezers) Clearance: 0 to 0.5 mm testing
* The micro-chucks provide the upper grip only. The lower grip suitable for each specimen is separately Set temp.: room Permits fixing of a Si
required. temperature +30˚C to +250˚C
346-54511-02 26 x 40 heating plate Accuracy: set temp. ± 2˚C board (approx. 20 mm
max. x 20 mm)
Method: PID control
Set temp.: room
346-54540-01 80 x 80 heating plate temperature +30˚C to +250˚C
Accuracy: set temp. ± 5˚C
max.
XY stage – for specimen positioning
P/N Product name Specification Comments
10 N micro-chuck Max. load: ±200 N
344-82861 XY stage Movement range: ±12.5 mm (X Manually positioned
with a micrometer
and Y directions)
Stereomicroscope – for observations during testing and sample positioning
Wire-pull Jig – for tensile testing of bonding wires, etc.
P/N Product name Specification Comments
P/N Product name Specification Comments
Jig that hooks onto the Stereomicroscope Magnification: x16 to x100
347-57500 20 N wire-pull jig Max. test force: 20 N center of the bonding wire 346-53303 (binocular type) Illumination: LED With zoom function
(low-heat type)
Anti-vibration base – for micro test-force measurements (0.05 N max.)
P/N Product name Specification Comments
Anti-vibration base 900(W) x 700(D) x 700(H)
339-81528 (passive type) Weight: 100 kg Integral with table
Anti-vibration base 700(W) x 600(D) x 165(H)
339-81524 (active type) Weight: 70 kg Tabletop type
For Compression Testing
Cone type Indenter and Indenter Mounting Adapter – for Table
compression testing of solder bumps P/N Product name Specification Comments
P/N Product name Specification Comments 1500(W) x 600(D) x 740(H)
088-20092-01 Table
50 μm dia. cone type Weight: 20 kg
340-47026-01 50 μm tip diameter
indenter
Solder balls, Table
500 μm dia. cone type micromachines, etc. (for use with active anti- 800(W) x 700(D) x 535(H) Total weight with active
340-47026-02 indenter (used in test 500 μm tip diameter 339-81524-03 vibration base) Weight: 215 kg anti-vibration ba- se :
examples) 285 kg
347-57266 Indenter adapter (mounted to
5 N, or above, load cell) Used to mount load cell Windbreak
to the top
347-57266-01 Indenter adapter (mounted to P/N Product name Specification Comments
0.5 to 2 N load cell)
Used to mount load cell Accommodates up to
347-57073 Indenter adapter to the bottom 30 mm clearance
346-53387-01 Windbreak 700(W) x 750(D) x 1200(H)
Anti-static construction between table and load
rod
Accommodates up to
30 mm clearance
Windbreak (for use with 700(W) x 750(D) x 1450(H) between table and load
346-54542 rod (or max. clearance
active anti-vibration base) Anti-static construction
if no active anti-
vibration base used)
Truncated-cone Indenter
For Shear Testing
Brake
MST-I Model Line-up by Capacity and Kit Number
Shear jig – for shear testing of IC chips
P/N Product name Specification Comments 346-5450X-XX
Applicable board
346-54383 50 N shear jig for IC chips Max. test force: 50 N size: 30 x 30 mm max. Model Capacity
Top-mounted load cell Bottom-mounted load cell Capacity
0 : HR
01 51 0.5N
2 : HS
02 52 1N
03 53 2N
04 54 5N
05 55 10N
06 56 25N
07 57 50N
08 58 100N
09 59 200N
10 60 500N
11 61 1kN
12 62 2kN
5