Page 12 - Shimadzu HMV-G Series

Options

No. Description P/N Description
Molded Sample Vise 1 Knoop Indenter 347-20418 Longitudinal edge angle 172°30’ , 130°
2 Brinell Indenter 347-20419-11 Brinell ultra hard steel ball indenter (1 mm diameter)
This accommodates molded samples with a variety of
sizes. 3 Triangle Pyramid Indenter 115° 347-20420 Tip angle 115° triangle pyramid indenter
Use this if the sample is embedded in resin. 4 Vickers Indenter 347-20344
Note: It can also be customized to suit the desired sample size. 5 Standard Vise 341-64251-40 36 mm opening (* Standard accessory for FA type)
ᶐ Molded Sample Vise 6 Standard Vise 347-64251-41 60 mm opening
7 Universal Vise 344-17140-40 22 mm opening
Standard Vise 8 Simple Leveler (for Universal Vise) 344-13218 For leveling the sample on the universal vise
9 Thin Sample Attachment, Type 1 344-16039-40 For sample with 0.4 to 3 mm thickness
Use this as the most standard vise.
Note that a universal vise is also available for samples 10 Thin Sample Attachment, Type 2 344-17040-40 For sample with 0.02 to 0.5 mm thickness
of indeterminate shape with top surfaces that cannot 11 Thin Sample Attachment, Type 3 344-17737-40 For sample with 30 mm max. width and 8 mm max. thickness
be horizontal when gripped. 12 Slender Sample Attachment, Type 1 344-16038-40 For sample with 0.4 to 3 mm diameter
13 Slender Sample Attachment, Type 2 344-82943-40 For sample with 0.15 to 1.6 mm diameter
14 Molded Sample Vise 347-21990-40 Diameter 1” to 1.5” Height 5 to 30 mm
Thin Sample Attachment, Type 3 15 Molded Sample Vise (for Electric XY Stage) 347-21990-41 Diameter 1” to 1.5” Height 5 to 20 mm (when the electric XY stage is attached)
16 Objective Lens, 5× 347-25575
Use this to fasten thin plates.
17 Objective Lens, 10× 344-89941-40
ᶇ Standard Vise
18 Objective Lens, 20× 344-89924-40
19 Objective Lens, 40× 347-25400
20 Objective Lens 40×, Super-Long Working Distance Type 344-89300-41
21 Objective Lens, 50× 344-89964-40
22 Objective Lens, 100× 344-89977-40
ᶍ Thin Sample Attachment, Type 3 23 Line Printer 347-20928-01 Equipped with graphics printer cable for printing graphs
24 Thermal Paper Roll 078-15027-11 For line printer
25 Standard Hardness Block HMV40 340-06619-14 Nominal hardness 40
26 Standard Hardness Block HMV100 340-06619-31 Nominal hardness 100
Additional Lineup 27 Standard Hardness Block HMV200 340-06619-22 Nominal hardness 200
28 Standard Hardness Block HMV300 340-06619-23 Nominal hardness 300
29 Standard Hardness Block HMV400 340-06619-24 Nominal hardness 400
30 Standard Hardness Block HMV500 340-06619-05 Nominal hardness 500
31 Standard Hardness Block HMV600 340-06619-06 Nominal hardness 600
32 Standard Hardness Block HMV700 340-06619-07 Nominal hardness 700
33 Standard Hardness Block HMV800 340-06619-08 Nominal hardness 800
34 Standard Hardness Block HMV900 340-06619-09 Nominal hardness 900
35 Digital Micrometer Communications Set 347-25447-11 Stroke ±12.5 mm; display unit 1 µm 2PLS / set (Equipped with cable)
36 Rotary Stage 344-82857-01 Stage surface diameter 125 mm; movement range ±5°
37 Disk Vacuum Absorption Device 344-17127-40 4,5,6 inches (Absorption air source is required.)
ᶇ Standard Vise ᶉ Universal Vise ᶊ Simple Leveler ᶋ Thin Sample Attachment, 38 Vibration Isolation Table (Bench top type) 339-82039-01
(for Universal Vise) Type 1
39 Vibration Isolation Table (Desk type) 344-04193-03
40 Windproof Case H750 347-24400-21
41 Windproof Case H900 347-24400-22 Use this in combination with an active vibration damping stand.
This motorizes the micrometer for the standard manual XY stage.
42 Electric Micrometer Kit 347-26307-41
Stroke: ±12.5 mm
43 Manual Length Stroke XY Stage 347-25551 Stroke: ±20 mm Stage area: 120 × 120 mm
44 Objective Micrometer 046-60201-02

ᶌ Thin Sample Attachment, ᶍ Thin Sample Attachment, ᶎ Slender Sample Attachment, ᶏ Slender Sample Attachment,
Type 2 Type 3 Type 1 Type 2

HMV-G
Micro Vickers Hardness Tester
12 13