Page 8 - Shimadzu EZ Test

Evaluating Plastics and Rubbers

Tensile Test on Rubber Dumbbells Piercing Test on FIlm Tensile Test on Fibers Friction Modulus Measurement
In this example, a rubber dumbbell was tensile-tested using pneumatic at grips. These This jig makes it possible to measure the piercing strength This jig includes capstans to grip thread, cords, and other This test device measures the friction between plastic lms
grips are able to use air pressure to grip specimens with a constant force, which makes it needed to puncture various lm materials, such as those used narrow brous samples so that an initial tension force can or between plastics and other materials. Both static and
possible to securely grip rubber and other specimens that decrease in thickness as in retort (boil-in-bag) pouches. Test samples are cut into circles be applied and breakage can be prevented at the chuck. dynamic frictional forces can be measured seamlessly.
tension is applied. Using an DSES-1000 extensometer allows elongation to be accurately about 20 mm in diameter for testing. Samples are gripped pneumatically.
measured all the way up to the breaking point.
DSES-1000 is compliant with various rubber tensile testing standards.

JIS K6251:2010 JIS K6272:2003
ISO 37:201 ISO5893:2002
ASTMD412-06a GB/T528-2009

Boil-in-bag piercing stand • 1 kN pneumatic capstan type grips for yarn Friction modulus measurement jig
Upper jig Adapter for AGS series jig ø16
Lower jig

Peeling Test on Adhesive Tape Tensile Test on O-ring Compression Test on Springs
The sample table slides in sync with the upper grip The O-ring is hooked onto rollers, which rotate during tensile The compression strength of springs can be measured by
movement to maintain a 90° peeling angle. The peeling testing. Tests conforming to JIS K6251, JIS K7312, ISO 37, and compressing the spring between upper and lower compression
test jig is compliant with JIS Z0237 and JIS Z1528. ASTM D412 standards can be performed. plates. The lower compression plate is designed so that ne
adjustments can be made to the parallelism of the plates.

• 1 kN screw-type flat grips
• Long travel extensometer for soft specimens DSES-1000

Tensile Test on Film Tensile Test on Plastic Bending Test on Plastic
In this example, lm was tensile-tested using grips intended In this example, a tensile test was performed on a plastic In this example, a 3-point bending test jig is used to test • Adhesive tape peeling test device • 1 kN roller-type grips Spring test jigs
for foil. These grips have a special grip face that reduces the sample using 5 kN non-shift wedge-type grips. The grip the bending of a plastic sample. This 3-point bending
breakage of lm and copper foil samples at the chuck faces move horizontally to tighten their grip on the sample test jig for plastics was designed to meet JIS, ISO, and
during testing. When used in combination with a TRViewX without moving in the vertical direction. This makes it easy ASTM standards and allows testing for any thickness
non-contact digital video extensometer, elongation and to set the distance between grips and minimize any vertical within the scope of the standards by changing the
lateral displacement can be accurately measured, which test forces acting on the specimen during the initial support set.
means the modulus of elasticity can also be calculated. tightening. When a tensile test force is applied, it causes the It also includes a jig for setting the distance between Evaluating Electrical and Electronic Parts
wedges to hold the sample securely. Furthermore, the user supports and checking whether the punch and supports
can comply with ISO standards by using an SSG-H are parallel, which makes it easy to adjust the test jig.
strain-guage-type one-touch extensometer.
45˚ Peel Test on Surface Mounted Devices Shear Test on Electronic Components Cyclic Bending Test on Printed Circuit Board
This test jig set is used to measure the peel strength of This test jig set is used to press vertically on components to This test jig is for cyclic bending tests of printed circuit
electronic parts, particularly the pins on IC chips. measure their shear strength. boards. It allows observation of uctuations in resistance in
response to cyclic loads, as well as other properties. It
enables repeatable tests of the thermal expansion and
contraction of solder.

• 1 kN grips for foil • 5kN manual non-shift wedge-type grips Plastic three-point bending jig Peeling test jig set IC pin test jig • Printed circuit board cyclic bending test jig
• Video-type non-contact extensometer TRView X series • Strain-gauge-type one-touch extensometer SSG-H series

EZ Test
8 Table-Top Universal Testing Instruments 9