Page 1 - Shimadzu AGX-V2 Series

C224-E122
AGX-V2 Main Unit Extension Series

Wide Test Space Model AUTOGRAPH AGX-V2 Series

With this model, the effective width of the test space of the testing machine main
unit is expanded to 1,000 mm. In combination with a surface plate, it enables testing
of large-sized test specimens that cannot be tested in normal testing machines.
Four wide models are available: AGX-10kNV2D W10, AGX-50kNV2 W10, Precision Universal Testing Machines
AGX-100kNV2 W10, and AGX-300kNV2 W10.
AUTOGRAPH AGX-V2 Series

Separately Installed Controller Model

This is a model with the controller and electrical parts separated from the loading unit. With cast iron and high-strength
materials, the shock at failure during a test can have an adverse effect on the electrical parts in the testing machine main
unit. With this model, by separating the controller and the electrical parts from the loading main unit, it is possible to
isolate them from the adverse effects of a shock during failure.
Conductive dust (carbon fiber, micro-wires, etc.) may damage the control unit and electrical components.
In areas where conductive dust is generated, a separate controller model with a structure that prevents dust from
entering is recommended.
Four separately installed controller models are available: AGX-50kNV2S, AGX-100kNV2S, AGX-300kNV2S, and AGX-600kNV2S.

Reinforced Yoke Model

This model can perform tests in a test space above the crosshead. Since tests can be performed above and
below the crosshead, it is possible to arrange tensile tests in the upper space and compression or bending tests
in the lower space.
Two reinforced yoke models are available: AGX-10kNV2D RY and AGX-50kNV2D RY.

This product is certified as one of Shimadzu's Eco-Products Plus.
Improved energy density is more than 40 % compared to conventional
models (AG-Xplus) based on test capacity multiplied by test speed.

AUTOGRAPH, AGX, XV-Talk, TRAPEZIUM and HyperVision are trademarks of Shimadzu Corporation or its affiliated companies in Japan and/or other countries.
Microsoft and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

For Research Use Only. Not for use in diagnostic procedures.
This publication may contain references to products that are not available in your country. Please contact us to check the availability of
these products in your country.
Company names, products/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation,
its subsidiaries or its affiliates, whether or not they are used with trademark symbol “TM” or “®”.
Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services, whether
or not they are used with trademark symbol “TM” or “®”.
Shimadzu disclaims any proprietary interest in trademarks and trade names other than its own.
www.shimadzu.com/an/ The contents of this publication are provided to you “as is” without warranty of any kind, and are subject to change without notice.
Shimadzu does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.
© Shimadzu Corporation, 2023 / First Edition: January 2023, 3655-10213-PDFIT, C224-E122