Page 4 - Shimadzu ON-LINE TOC-VCSH

C391-E081A

Specifications ON-LINE TOC-VCSH

Measured items NPOC (TOC by IC subtraction using acid sparging), TC, IC, TOC (TC-IC), TN (optional TNM-1 required)
680°C combustion catalytic oxidation/NDIR method
Measurement method
720°C combustion catalytic oxidation/ chemiluminescence method (when TNM-1 is connected)
TC: 0-500 µg/L to 0-25,000 mg/L variable
Measurement range
IC: 0-500 µg/L to 0-30,000 mg/L variable
Measurement cycle Approx. 5 to 999 minutes (for NPOC measurement)
Number of measurement channels 1 channel On-Line TOC Analyzer TOTAL ORGANIC CARBON ANALYZER
Reproducibility CV 1.5% max.
Linearity ±2% F.S. max. ON-LINE TOC-VCSH
Zero stability ±2% F.S. max. per day
Span stability ±2% F.S. max. per day (ambient temperature fluctuations within 5°C)
Calibration cycle Variable in the range 1 to 999 hours
Sample injection method Automatic injection using syringe pump/slider
Sample injection volume Variable in the range 10 to 2,000 µL
Sample dilution function Diluted in syringe; dilution factor: 2 to 50
IC pretreatment Automatic acidification and sparging
High-purity air or oxygen (1 ppm max. of CO, CO2, or HC)
High-purity nitrogen (1 ppm max. of CO, CO2, or HC) (when using optional nitrogen gas carrier kit)
Carrier gas Supply pressure: Approx. 600 kPa
Flow rate: 150 mL/min (230 mL/min with sparging)
Analog output (1 output): Select from 4 to 20 mA, 0 to 16 mA (insulation, load resistance: 750 Ωmax.), and 0 to 1VDC
Measurement value output
RS-232C: Baud rate; 9,600 bps, Data length; 8 bits, Parity; none, Stop bits; 1
Alarm output Measurement value upper limit and upper upper limit alarms,
system error alarm: No-voltage contact output (maximum: 5VA, 0.1A, 50V)
Control input Remote stopping and starting of sample measurement and calibration
Flow rate: Approx. 0.1 to 1 L/min
Sample conditions Sample volume: 5 to 7 mL per measurement
Temperature: 0 to 90°C
Ambient temperature 5 to 35°C
AC 100 - 127V ±10% MAX 800VA 50/60 Hz
Power supply AC 200 - 240V ±10% MAX 1200VA 50/60 Hz
Dimensions Approx. W440 x D560 x H460 mm (excluding protrusions)
Weight Approx. 40 kg
Special Accessories

Part Number Description
OCT-1 638-93150-01 Permits the automated measurement of up to seven samples, in addition to an on-line flow line.
OCT-1 (second unit) 638-93150-11 Second unit to expand OCT-1. Permits the automated measurement of up to 15 samples,
in addition to an on-line flow line.
TNM-1 638-91065 Permits TN (total nitrogen) measurements.
Nitrogen carrier gas kit 638-42054 High-purity N2 gas (1 ppm max. of CO, CO2, or HC) can be used as the carrier gas.
*Simultaneous use of TNM-1 and this option is not possible.
*The measuring range with this option becomes 0-500 µg/L to 0-100 mg /L for TC and IC both.
Sample adjustment tank 638-42053 Used when bubbles are contained within the sample.

External Dimensions Diagram

ON-LINE TOC-VCSH + Sample adjustment tank

460

Sample
adjustment tank
440
(depth 560)

Company names, product/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation or its
affiliates, whether or not they are used with trademark symbol “TM” or “®”.
Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services. Shimadzu
disclaims any proprietary interest in trademarks and trade names other than its own.
For Research Use Only. Not for use in diagnostic procedures.
The contents of this publication are provided to you “as is” without warranty of any kind, and are subject to change without notice. Shimadzu
does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.
www.shimadzu.com/an/ © Shimadzu Corporation, 2012
Printed in Japan 3655-06230-10AIT