Page 1 - Shimadzu iSpect DIA-10

C060-E016

Speci cations iSpect DIA-10

Measurement Method Dynamic image analysis method
Particle Size Measurement Range *1 5 to 100 µm
Number Concentration *2 Coefficient of Variation (CV) ≦ 5 %
Particle Size Dynamic Particle Image Analysis System
Area circle equivalent diameter, perimeter equivalent diameter, maximum length, maximum perpendicular length,
vertical Feret diameter, horizontal Feret diameter, particle perimeter, envelope perimeter iSpect DIA-10
Measurement Parameters Shape Analysis
Circularity, aspect ratio, horizontal bounding rectangle aspect ratio
Other Parameters
Particle area, average brightness
Statistical Analysis Items Average, standard deviation, CV, median (50 % value), mode value, user defined % value
Display Items Particle image, histogram, scattergram, cumulative distribution, frequency/integration table, user defined area particle count
Required Sample Size 50 to 1000 µL
Pump Syringe pump, flowrate 0.1 mL/min
Measurement unit: PEEK resin, fluorine resin, quartz, fluorine rubber
Wetted Part Materials
Pump unit: Fluorine resin, glass
Power Supply Requirements 115 or 230 V AC, 100 VA, 50/60 Hz
Measurement unit: W223 × D465 × H205 mm, 10 kg
Dimensions/Weight
Pump unit: W97 × D190 × H150 mm, 3 kg
*1: Performance guarantee range of area circle equivalent diameter. Measured using a Shimadzu NIST traceable particle size standard sample.
*2: Measured using concentration standard samples speci ed by Shimadzu.

For Research Use Only. Not for use in diagnostic procedures.
This publication may contain references to products that are not available in your country. Please contact us to check the availability of these
products in your country.
Company names, products/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation, its
subsidiaries or its af liates, whether or not they are used with trademark symbol “TM” or “®”.
Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services, whether or not
they are used with trademark symbol “TM” or “®”.
Shimadzu disclaims any proprietary interest in trademarks and trade names other than its own.
www.shimadzu.com/an/ The contents of this publication are provided to you “as is” without warranty of any kind, and are subject to change without notice. Shimadzu
does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.
© Shimadzu Corporation, 2019
First Edition: April 2019, Printed in Japan 3655-02909-30AIK