Page 2 - Testing and Inspection Machines

Servopulser Servo Dynamic Systems
Universal Testing Machines : Servo Hydraulic System Universal Testing Machines : Ball Screw System AUTOGRAPH Viscosity Testing Machines

High-Speed Impact Testing Machine CCH Series for Bending Tests of Concrete Beams Electric Motor Driven Actuator Compact Hydraulic Vibration Generator Force Simulator Flow Tester (Capillary Rheometer) Automatic Mooney Viscometer
Universal Testing Machines
Electromagnetic Force Fatigue/Endurance Testing System
AUTOGRAPH
AG-X plus Series
UH-X Series
CCH Series
Hydroshot HITS Series Servopulser EMT Series NJ-SERVO JF Series CFT-500EX/100EX SMV-301/301RT
The NJ-SERVO electric motor driven actuator utilizes an electric motor drive
This fatigue/endurance testing system uses an oil-free, clean and quiet
This easy-to-handle, lightweight and compact hydraulic vibration generator
These are computer-controlled hydraulic servo type universal testing This testing machine supports concrete beam bending tests and Designed for reliability and ease-of-use, these precision universal testers provide high control and measurement performance. For the three most important The CFT-500EX/100EX flow tester evaluates the viscosity of resins and The SMV-301 automatic Mooney viscometer evaluates the Mooney viscosity
As demands for safety and reliability increase, it is becoming increasingly
functions of a testing machine - setting, measurement, and inspection - enjoy the highest level of performance available. TRAPEZIUM X PC software uses
important to evaluate the dynamic strength (impact resistance characteristics)
compression tests. A special bending test jig is attached to the load table.
machines. The test force is shown with both analog (optional) and digital electromagnetic force drive source. It is capable of high-speed repeated system. High accuracy test control is enabled by a special servo motor and applies a repeated load to actual products, such as automobile parts, other fluid materials based on the temperature, pressure and flow and curing characteristics of rubber. A touch-panel LCD screen enables easy
In this design, concrete compression tests can also be performed by
of materials and parts. The HITS obtains data such as maximum test force,
displays. A touch-panel screen is used for the operating panel, enabling a testing at a maximum speed of 2 m/sec and a maximum stroke of ±50 mm. stroke displacement measurement sensor. In addition, the system configuration furniture and structures, to evaluate their endurance. rate. It is ideal for evaluating the flowability of thermosetting resins. operation, and the key performance capabilities, such as evaluating
newly designed, state-of-the-art .NET technology that ensures operation is easier than ever. Additionally, perform tests without a computer via a color TFT
attaching the lower compression test jig for concrete to the center of this
wide variety of functions to be operated with the touch of a single button.
touch panel, use the USB memory function to directly set test parameters created previously on a PC, and then easily transfer result data to the PC via a
energy and displacement at speeds up to a maximum 72 km/h (20 m/sec). It has a large testing space and also supports atmosphere testing when the is simpler in comparison to hydraulic actuators, so it is easy to maintain, and temperature recovery characteristics, are outstanding. It is also available with
• Dynamic Test Force : ±5 kN, ±10 kN, ±20 kN, ±30 kN (4 models) • Extrusion Pressure : 0.49 to 49 MPa
USB device. Choose from several floor-type and tabletop models to fit your application needs.
Two models are available - a tension type (HITS-T10) and puncture type optional thermostatic chamber is attached. achieves power savings and space savings. This system accommodates a wide • Effective Stroke : ±50, ±100, ±150 mm (selectable) • Test Temperature : (ambient + 20˚C) to 400˚C an ISO and ASTM-based stress relaxing feature (Model SMV-301RT).
These models also allow connection to computer data processing
lower bending jig. For the specifications, refer to the CCH series loading
equipment. unit. (Make separate inquiries if you wish to extend the test stroke.) range of tests with a high degree of expandability. This includes everything • Test Types : Constant temperature test or constant rate heating test • Applicable Standards : JIS K6300, ISO 289, ASTM D1646
(HITS-P10).
• Capacity : 10 N to 2000 kN (16 models)
Model EMT-1kNV-30 EMT-1kNV-50 EMT-5kN-30 EMT-5kN-50
Capacity : 200, 300, 500, 600, 1000, 2000, 3000 or 4000 kN (eight models)
• Impact Test Force : 10 kN
• Capacity : 200, 300, 500, 600, 1000, 2000, 3000 or 4000 kN (eight models) Max. Test Force ±1 kN ±5 kN (Dynamic) from endurance evaluations of the main body and assemblies of automobiles, • Mooney Viscosity Measurement Range : 0 to 200 M
• Test Force Range : x1 to x50, in 6 steps (for both static and dynamic testing) ±3.5 kN (Static) aircrafts, and other transportation equipment to endurance evaluations of • Temperature Control Range : (ambient +20 ˚C) to 200 ˚C
Test Force Range : x1 to x50, in 6 steps
• Speed Setting Range : 0.1 mm/s to 20 m/s
Computer Control Functions :
• Piston Stroke : 300 mm Stroke ±30 mm ±50 mm ±30 mm ±50 mm stand-alone parts; from multi-axis tests combining multiple actuators to uniaxial
• Computer Control Functions :
Single test, cycle test, metal tensile test, high-temperature tensile test, and 3-step stroke speed
• Controller : Model 4870 Controller (designed especially for high-speed impacting)
Single test, cycle test, metal tensile test, high-temperature tensile test, and 3-step stroke speed
• Software : High-Speed Impact Testing Software Max. Frequency 200 Hz 200 Hz 100 Hz tests; and from sine waves to working waveform simulation tests.
switching
Hardness Testers
Table-top Model Floor Model
Micro Strain Tester
Torsional Dynamic and Fatigue Testing System
Electromagnetic Force Micro Material Tester Servopulser Control Unit AUTOGRAPH Ultrasonic Fatigue Testing Machine Film, Surface Treated Layer, and Microscopic Electronic Components
Concrete Compression Testing Machine
Evaluation System : Dynamic Ultra Micro Hardness Tester Particle Micro Compression Tester
MST-X
EHF-T
Controller - 4830
CONCRETO 2000X / 3000X
Micro-Servo MMT Series 30 MN Structural Fatigue Testing Machine AGS-X Series USF-2000
DUH-211/211S MCT-211 Series
The CONCRETO 2000 is a compression testing machine that allows efficient
By utilizing an electromagnetic actuator, this testing machine performs The 4830 is a servo controller for fatigue and endurance test equipment. Testing is possible on just the testing machine itself or with a PC connected, The USF-2000 ultrasonic fatigue testing machine employs ultrasonic vibrations
These testing machines test the torsional strength characteristics of engines,
This testing machine is designed for evaluating the strength of extremely small
With a capacity of 30 Mega-Newton, it is Japan's largest testing machine. It
The load waveform can be displayed in color LCD. The main operation can
and safe testing of ultra-high strength concrete (such as the concrete used in
gram-level test forces or micron level high-speed cyclic loading. It is ideal for is used to evaluate the strength characteristics of entire structural and customers can choose from models suited to their specific testing to test the fatigue strength of materials, accomplishing even gigacycles in a A new evaluation system for measuring the material strength of micro The MCT-211 series measures the compression strength of particles
turbines, and motors, and of shafts, couplings and clutches that transmit
samples, such as electronic parts, micro devices or ultra fine wires. Micro test
high-rise buildings), at high capacities without causing the samples to
requirements. Safety and operability have also been improved by addition of
forces and displacements are measured and controlled using a highly precise
assemblies or portions thereof, with respect to various forces or external
evaluating the dynamic strength of micro materials, small parts or other be easily done with a touch panel. A high performance has been achieved by rotational torque used in automobiles, aircraft, carriages, electric motors, and short period of time. Parameters can be entered and tests monitored via the regions, such as semiconductors, LSI, ceramics, hard disks, vapor (several µm to several 100 µm diameter). It allows the measurement
actuation and measurement system, making it possible to obtain a variety of
explode (destruction of sample). This single machine can handle samples forces, such as dead forces or live forces, or seismic, wind or snow forces. In machines. computer provided. deposited films, and thin coating layers, not addressed by previous of the compression strength of individual particles of various
similar samples.
an optional safety cover and easy-to-use multi-table. High-quality data is
a rangeless measurement function of 24-bit resolution and the latest digital
data. An X-Y stage, for easy sample positioning and observation, and a stereo
ranging from ultra-high strength concrete to one in early age or mortar particular, it is used to prove safety margins by verifying deformation and provided thanks to the optional newly developed TRAPEZIUM LITE X data • Test Frequency : 20 kHz ±500 Hz hardness testers. It can also be used to evaluate the hardness of materials in the powdered stage of processing, such as ceramics,
control technology. The 4830 can be connected to a PC with a USB, and can
• Static capacity 1.5× that of dynamic capacity
microscope are also available.
ultimate strength levels.
samples. MMT-11NV-2 MMT-101NV-2 MMT-101NV-10 MMT-250NV-10 be controlled with software (option). processing software. • Test Stress : 180 to 900 MPa (with circular tapered specimens) plastics and rubbers. plastics, pigments, food products or pharmaceuticals. The resulting
• Torque actuator has outstanding endurance at low friction.
Test Force Capacity 10 N 100 N 100 N 250 N • Extends the life of hydraulic operating fluid and hydraulic operated devices. • Test Force Ratio : -1
• Control Method : Fully digital two degrees of freedom PID control
• Test Force Measuring Capacity : [2000] 40 to 2000 kN 10 mm • Note : The specific capacity and capabilities of the testing machine are configured after • Capacity : 1 N to 200 kN (15 models) • Test Force Measurement Range : 2 mN to 2 kN • Load Range : 0.1 mN to 1961 mN at full scale data relates closely on how the finished material eventually performs.
Stroke
2 mm
• Sub controller function enables the specimen to be attached and removed without an overload
Max. Frequency 60 Hz 100Hz • Frequency Response : 1 kHz (controller alone) being applied to it. • Actuation Resolution : 5 nm (Model HR) and 20 nm (Model HS) • Indentation Depth Range : 0 to 10 µm with 0.0001 µm min. indicated value • Loading Method : Electromagnetic 9.807 mN to 1.961 N (1 to 200 gf)
consultation with the customer.
[3000] 60 to 3000 kN
(six range levels) • Control Channels : 4 Channels • Full safety interlock is provided to enable unmanned testing. • Deflection Display Resolution : 20 nm • Test Modes : 3 modes (Model 211) or 7 modes (Model 211S) or 9.807 mN to 4.903 N (1 to 500 gf)
AC 100 V
Power Requirements
• Control Method : Hydraulic Servo (With Anti-Bursting Feature) • Analog Input Resolution : 24-bit • Testing Speed : 0.0012 to 30 mm/min (Model HR) and 0.0048 to 120 mm/min (Model HS) • Includes the feature for converting to ASCII format. • Indenter : 50 µm diameter diamond cone
• Upper/Lower Compression Plate Diameter : 220 mm
• Displacement Measurement : Differential Transformer 0 to 10 µm or 0 to 100 µm
• Optical Viewing System : Includes x500 microscope
Testing and Inspection Machines Testing and Inspection Machines
6 2 General Brochure 7 3 General Brochure 8