Gas Filters / Pre-Conditioned HC Filter
Pre-Conditioned HC Filter is an aged, activated carbon filter that is made without using the fluororesin sealing coating for joints. When concentrating the extract during the PFAS pre-treatment, place this PTFE-free activated carbon filter in the Nitrogen line. This will result in the reduction of contaminants derived from the piping.
P/No: 3001-17005 Pre-Conditioned HC Filter, PTFE tape free. for 1/8in. Connection
P/No: 3001-17006 Pre-Conditioned HC Filter, PTFE tape free. for 1/4in. Connection
Plier-Type Tubing Cutter
This tubing cutter makes clean cuts on 1/16 inch O.D. stainless steel tubing and ideal for cutting tubing in tight places.
Part Number: 6010-81230 1/16 inch Tubing Cutter
Rotary Tubing Cutter for 1/16 inch tubing
Part Number: 3001-31701 Rotary Tubing Cutter for 1/16 inch tubing
Part Number: 3001-31712 cutter replacement blade (3 pieces)
Tube cutter
The mini tube cutter is a cutter that can easily cut tubes from 4 mm to 5/8 inch (15.875 mm).
Part Number: 3001-31451 Mini tube cutter
Part Number: 3001-31312 Mini tube cutter replacement blade
Ferrule removal tool
Remove the ferrule out of the nut in an easy way.
Can be used with most common nuts and ferrules.
The O.D. of the pushing pin is 1 mm. Cannot be used with the OPTIC metal ferrules (only for graphite).
Part Number: 3001-12745 ferrule removal tool
Shortix® Capillary GC Column Cutter
– Clean, square cuts with a diamond blade.
– Built-in magnifier to verify square cut.
– Use with 0.25mm ID to 0.53mm ID tubing (0.78mm OD maximum).
Part number: SGT-S0010 Shortix Column Cutter
Ceramic Capillary GC Column Cutter
Part number: 1010-41100 Ceramic Tube Cutter (set of 4)
Ferrule sets
Part number: 3001-12740 Ferrule Removal kit
Kit has two tools; one for removing 0.4mm adaptor ferrules and one for 0.8mm
Part number: 3001-24625 pin vice drill set
Merlin microseal
The Merlin Microseal is a long-life replacement for the standard septum used in Gas Chromatography. High pressure capability and resistance to wear make it the most unique septum on the market today. The Microseal fits standard in the OPTIC-4 inlet and is also available for many different GC types.
