Page 1 - XDimensus300

C251-E035

Specifications XDimensus 300

Model: XDimensus 300
Rated Power 135 W
X-Ray Generator Max. Tube Voltage 225 kV
Max. Tube Current 1000 µA
X-Ray Detector Flat panel detector
X-Ray Detector Size 16 inch Dimensional X-Ray CT System
X-Ray Detector Shades of Gray 16 bit, 65536 shades of gray
Max. Sample Size and Weight ø300 mm × H 300 mm, 10 kg max. XDimensus 300
Max. CT Scan Region ø300 mm × H 210 mm
Probing Error |PS| + PF = 5.0 m* 2
Measurement Accuracy* 1
Sphere Distance Error ± (3.8 + L/50) m
SRD Axis* 3 730 mm
CT Stage Max. Stroke
CT-Z Axis 300 mm
CT Data Acquisition Time 20 min to 60 min
Max. CT Image Size 2048 × 2048
High-Performance Computing System Yes
Shield Box Size and Mass W 2,195 mm × D 1,561 mm × H 1,971 mm, approx. 4,000 kg
Air Conditioning Unit Size and Mass W 832 mm × D 961 mm × H 1,529 mm, approx. 200 kg
Specialized Desk Size and Mass W 1,200 mm × D 700 mm × H 1,270 mm, approx. 50 kg
Main Unit Single-phase, AC 200 V ± 10%, 50/60 Hz, 4 kVA
Air Conditioning Unit Three-phase, AC 200 V ± 10%, 50/60 Hz, 2.6 kVA
Power Requirements
Control Computer Single-phase, AC 100 V ± 10%, 50/60 Hz, 1.5 kVA
Ground Type-D ground (100 ohm max. ground resistance)
Air Source 0.6 MPa to 1 MPa, 60 SLPM min.
External Leakage Dose 1 Sv/h max.
*1 Measurement Accuracy Conformity to the VDE/VDI 2630 Part 1.3 standard
*2 Probing Error SRD = 200 mm, in the center of the fluoroscopic image
*3 SRD Axis The source-to-rotation center distance (SRD) is the distance from the X-ray source to the
rotation center of the sample.

Layout and Dimensional Drawings (Units: mm)
Air conditioning unit
(space required for the air inlet and outlet)
High-voltage
transformer Cooling water unit
(961)
(930) (530)
X-ray control box (832) (1000)
(2195) (1561) (605) (360) (1000)

(1971) (3500)
(1270) (1202)
(700)

(700) (1200) Rack XDimensus 300
main unit
Operation desk
(4000)
Recommended Installation Area: W 4000 mm × D 3500 mm

For Research Use Only. Not for use in diagnostic procedures.
This publication may contain references to products that are not available in your country. Please contact us to check the availability of these
products in your country.
Company names, products/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation, its
subsidiaries or its affiliates, whether or not they are used with trademark symbol “TM” or “®”.
Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services, whether or not
they are used with trademark symbol “TM” or “®”.
Shimadzu disclaims any proprietary interest in trademarks and trade names other than its own.
www.shimadzu.com/an/ The contents of this publication are provided to you “as is” without warranty of any kind, and are subject to change without notice. Shimadzu
does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.
© Shimadzu Corporation, 2017
First Edition: December 2017, Printed in Japan 3655-12712-30ANS