Page 1 - Shimadzu Fully Automatic Concrete Compression

C221-E012

Universal Testing Machines Universal Testing Machine Optional Test Devices

Upper Spherical Compression Plates for
Concrete (JIS A 1108)
This upper spherical compression plate is com-
pliant with JIS A1108. A fixed compression
plate provided as standard for each model is
used for the lower compression plate. SR 3° or higher Fully Automatic Concrete Compression Testing Machine Hydraulic Universal Testing Machines
Standard setup : Upper spherical compression plate
(upper plate only), 1 set Center of spherical seat Fully Automatic Concrete
Flatness : Within 0.01 mm per 100 mm Upper Spherical Compression Plate
Rockwell hardness : HRC55 or higher
Angle of rotation of compression plate: 3° or higher
Applicable testing machine P/N Compression Testing Machine
Plate dia. (mm)
Model Capacity (kN)
Ø160 Ø220
UH 1000 346-42002-21 346-42002-22
2000 346-42002-31 346-42002-32
UH-500kNX UH-F500kNX 1000 346-42003-21 346-42003-22
UH-F
2000 346-42003-31 346-42003-32
High-Efficiency Notes: 1. The compression plate can be attached by simple one-touch operation with the UH-F model.
2. Please contact Shimadzu for items with different specifications.
Universal Testing Machine Universal Testing Machine
UH-X Series UH-FX Series Bending Test Jigs for
With a semi-auto tuning function, Front-opening grips are provided to Concrete (JIS A 1106)
Lower crosshead
highly accurate stress control and enable performing high-efficiency tensile These test jigs are compliant with bending Specimen
strain control are now possible. tests. The series can be extended into an strength test methods for concrete using
In addition, use of the hybrid hydraulic automatic tensile test system by adding trisected point loading. Table
source contributes to significant an automatic extensometer and data
power savings. It is compliant with ISO processor. It is compliant with ISO 6892- Standard setup: Bending test jigs for concrete, 1 set Bending Test Jigs for Concrete (mm)
6892-2009 and JIS Z 2241. 2009 and JIS Z 2241. Applicable testing Allowable Load point Support Span of
machine P/N test force Tip radius×width Radius×width Span load points 1/3 L
Model Capacity (kN) UH UH-F for jig (kN) (mm) (mm) L (mm) (mm)
Capacity 200 kN to 4,000 kN; 7 types Capacity 300 kN to 4,000 kN; 6 types
*200/300 343-02800-02 343-02813-01
Force range rangeless Force range rangeless UH 500 343-02800-03 343-02813-02 300 100
UH-F 100 15×170 15×170 450 150
Test control Single, cycle, stress, Test control Single, cycle, stress, 1000 343-02800-04 343-02813-03
functions and strain test control, etc. functions and strain test control, etc. 2000 343-02800-05 343-02813-04
*No 200-kN type is available for the UH-F series.
I-Beam Bending Test Jig

An I-beam is placed on the table of a testing machine’s loading unit when performing bending tests on large materials.
The I-beam can be removed when not needed.
Applicable samples : Metal (steel), wood, concrete, structural members consisting of I-Beam Bending Test Jig with Rollers
composite materials, laboratory models, etc.
For testing machines of 1000 kN or above, I-beam bending test jigs with rollers are
Standard setup : Bending test jigs, 1 set also available. In this case, the loading unit is installed underfloor and the I-beam
moves on rails embedded on the floor.
Applicable testing Allowable test Sample Column and
machine P/N Max. span L force for jig Roller (mm) height screw rod
(m) extension (mm)
Model Capacity (kN) UH UH-F (kN) Diameter Width (mm) UH UH-F Specimen Max.1000 kN
343-01913-03 − 1.5
*200 343-01913-04 − 2 100 30 250 300 200 − Lower crosshead Rail
343-01913-05 343-02815-13 1.5
300 150 30 250 300 200 200
343-01913-06 343-02815-14 2
343-01913-07 343-02815-03 1.5
500 250 50 400 400 300 300 I-beam
UH 343-01913-08 343-02815-04 2
UH-F 343-01913-09 343-02815-05 1.5 Table
1000 343-01913-10 343-02815-06 2 500 50 400 500 500 500 L:Span d:Roller diameter W:Roller width
343-01913-11 343-02815-07 3 I-Beam Bending Test Jig with Rollers
343-01913-12 343-02815-08 1.5
2000 343-01913-13 343-02815-09 2 1000 70 500 500 800 800
343-01913-14 343-02815-10 3
* No 200-kN type is available for the UH-F series.
Note : The column and screw rod extension amounts in the table above are based on the following specifications.
For details on part Nos. for extending the column and screw rod, see page 2.
1. Deflection: Within the standard ram stroke
2. Sample height: Within the dimensions indicated in the table
Test jigs other than those in the table are also available. Please contact Shimadzu for details.
Company names, product/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation or its
affiliates, whether or not they are used with trademark symbol “TM” or “®”.
Third-party trademarks and trade names may be used in this publication to refer to either the entities or their products/services. Shimadzu
disclaims any proprietary interest in trademarks and trade names other than its own.
For Research Use Only. Not for use in diagnostic procedures.
The contents of this publication are provided to you “as is” without warranty of any kind, and are subject to change without notice. Shimadzu
does not assume any responsibility or liability for any damage, whether direct or indirect, relating to the use of this publication.
www.shimadzu.com/an/ © Shimadzu Corporation, 2016
Printed in Japan 3655-05412-30AIT